Professional Flaring Tool Kit with Pipe Cutter for 5-16mm Copper & Aluminum Pipes - Brake Line Repair, HVAC & Plumbing Projects - Silver/Black/Red

The flaring tool allows you to flange aluminium and copper pipes quickly and easily. The 7 sizes of clamp and matching adapters are suitable for pipes from 5 to 16mm in diameter. Simply cut the pipe to size beforehand using the pipe cutter supplied. The set is neatly stored in the practical case.Flaring Tool Details- Clamp H x W x D: approx. 6.5 x 17.5 x 1.5 cm- Flaring tool H x W x D: approx. 8.5 x 14 x 2 cm- Pipe cutter H x W x D: approx. 3 x 12.5 x 6 cm- Case H x W x D: approx. 4 x 33 x 14 cm- Set weight: approx. 1.6 kg- Material: Steel, aluminium, plastic- Colours: Silver, black, redUniversal Pipe Flange Tool- For flaring brake lines and air conditioning systems- Produces single and double flares- Suitable for copper and aluminium tubing- For pipe diameters from 5 to 16 mm- Adapters: 5, 6, 8, 10, 12, 14 and 16 mmHow to Use- Cut the tube at right angles to the tube axis- Deburr the tube end- Slide the flare nut over the tube- Insert the tube from below into the appropriate hole in the clamp- Allow the end of the pipe to protrude from the clamp to the first shoulder of the adapter.- Tighten the clamp (starting with the wing nut closest to the pipe)- Place the appropriate adapter on the pipe- Apply a drop of oil to the flaring cone- Position the flaring tool over the clamp- The undercuts on the flaring tool must engage with the underside of the clamp.- Centre the flaring tool over the adapter- Turn the handle down until the adapter touches the clamp.- Omit adapter for single flaring